Rigid Foams

UrePac® Rigid products can range from low density foams (10-100kg/m3) for insulation applications to high density foams (101-1000kg/m3) for structural components.

Why Rigid Foams?

UrePac® Rigid foams are widely acknowledged for their excellent insulation values, energy efficiency and high strength to weight properties.

Typical Applications

Low-density foams are used for,

  • Insulation
  • Building Panels
  • Hot Water Systems
  • Cooler Boxes

High-density foams are predominantly used for,

  • Structural Furniture Components
  • Simulated Wood Mouldings

Types of Rigid Foams

This product list is a typical example of the rigid foams supplied in these applications. If you require any polyurethane systems not listed please contact our specialists to discuss your requirements further.

Zero Ozone Depletion Potential (ODP) Excellent insulation performance 1:1 v/v mix ratio

Product CodeCream Time (s)Free Rise Density (kg/m3)TDSSDS(GHS)DescriptionFeatures
UrePac® Rigid 33 4533 ± 345 ± 2UrePac® Rigid 33 45SDS UrePac® Rigid 33 45UrePac® Rigid 33 45 (AUE276) is a two component, fire retardant, low density rigid polyurethane foam system, producing a foam with nominal free rise density of 34-36kg/m3. The system has been formulated as a general-purpose pour/injection foam that can be ‘hand mixed’ and can also be processed through polyurethane injection machines at 1:1 volume ratio.
  • Fully tested for Marine buoyancy applications.
  • Excellent insulation properties for temperatures ranging from -30°C to +85°C
  • Low weight and high stiffness
UrePac® Rigid 30 34 Chlorine Free30 ± 335 ± 2UrePac® Rigid 30 34 Chlorine FreeSDS UrePac® Rigid 30 34 Chlorine FreeUrePac® Rigid 30 34 ECO is a two component, polyurethane rigid foam comprising of a portion of recycled polyol content, polyether polyol and PMDI Isocyanate. The system has been developed for use as a general purpose, 34 kg/m3 density insulating foam.
  • Fire Retardant
  • Zero ODP
  • Excellent Insulation Performance

Excellent insulation performance for general purpose machine dispense applications.

Product CodeCream Time (s)Free Rise Density (kg/m3)TDSSDS(GHS)DescriptionFeatures
UrePac Rigid 16 441644Urepac Rigid 16 44SDS Urepac Rigid 16 44 PolyolUrePac® Rigid 16 44 is a two component, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. The system has been developed to be processed through high or low pressure dispensing machinery with excellent insulation performance for general purpose applications.
  • Zero ODP and GWP
  • Exceptional Insulation
  • Excellent Flow

Product CodeCream Time (s)Free Rise Density (kg/m3)TDSSDS(GHS)DescriptionFeatures
UrePac Rigid 3 34 (Fire Retardant)334UrePac Rigid 3 34SDS Urepac Rigid 3 34 PolyolUrePac® Rigid 3 34FR (AUSFOAM 30) is a low density rigid polyurethane Spray Foam system specifically formulated to provide a highly flame retarded foam system with a nominal ‘applied’ density of 35 kg/m3 depending on application parameters. It is formulated for use in commercial / industrial wall and ceiling insulation applications where the foam is applied into installed stud work / framed construction. It is to be installed according to the applicable Building Code of Australia regulations and design codes
  • Highly Fire Retardant
  • Excellent Surface Finish
  • 1:1 Mix Ratio for Standard Graco Equipment
UrePac Rigid 3 30 Chlorine Free330UrePac Rigid 3 30 Chlorine Free Spray FoamSDS Urepac Rigid 3 30 Chlorine Free PolyolUrePac® Rigid 3 30CF is a low density rigid polyurethane Spray Foam system based on polyether polyols and MDI isocyanate. It has been specifically formulated to be halogen free for application to stainless steel. The product has excellent insulation and reactivity for horizontal and vertical application.
  • Zero ODP
  • Seamless, Durable and Waterproof
  • Halogen Free for Stainless Steel
UrePac Rigid 3 50350Urepac Rigid 3 50SDS Urepac Rigid 3 50 Polyol
UrePac Rigid 4 1004100UrePac Rigid 4 100SDS Urepac Rigid 4 100 PolyolUrePac® Rigid 4 100 is a low density rigid polyurethane Spray Foam system based on polyether polyols and MDI isocyanate. It has been specifically formulated to be a medium density structural spray foam.
  • Zero ODP
  • Seamless, Durable and Waterproof
  • High Strength to Weight Properties
UrePac Rigid 6 969Urepac Rigid 6 9SDS Urepac Rigid 6 9 PolyolUrePac® Rigid 6 9 is an ultra low density ‘open cell’ Spray Foam system specifically formulated to provide a foam with a nominal ‘applied’ core density of 8-10 kg/m3 (1/2 pound) depending on application parameters. It is formulated for use in commercial / residential wall and ceiling insulation applications where the foam is applied into installed stud work / framed construction. It is to be installed according to the applicable Building Code of Australia regulations and design codes.
  • Over 100 Times Expansion
  • Excellent Acoustic and Thermal Insulation Properties
  • 1:1 Mix Ratio for Standard Graco Equipment

Product CodeCream Time (s)Free Rise Density (kg/m3)TDSSDS(GHS)DecriptionFeatures
UrePac Rigid 70 707070Urepac Rigid 70 70SDS Urepac Rigid 70 70 PolyolUrePac™ Rigid 70 70 is a slow reactivity, two component polyurethane (PUR) rigid foam based on polyether polyol, PMDI isocyanate and zero ozone depletion potential (ODP) blowing agent technology (HFC). The system has been developed so it can be dispensed through low and high pressure equipment or hand-mixed and poured. The foam was designed for use as a medium density PUR block foam with a core density of 60-65 kg/m3 for general purpose thermal insulation applications.
  • High Strength
  • Slow Reactivity
  • Low Viscosity
UrePac Rigid 80 13080130UrePac Rigid 80 130SDS Urepac Rigid 80 130 PolyolUrePac™ Rigid 80 130 is a slow reactivity, two component polyurethane (PUR) rigid foam based on polyether polyol and MDI isocyanate. The system has been developed so it can be dispensed through low and high pressure equipment or hand-mixed and poured. The foam was designed for use as a high density PUR block foam with a core density of 120 kg/m3 for general purpose structural applications.
  • High Strength
  • Slow Reactivity
  • 1:1 v/v Mix Ratio
UrePac Rigid 90 16090160Urepac Rigid 90 160SDS Urepac Rigid 90 160 PolyolUrePac™ Rigid 90 160 is a slow reactivity, two component polyurethane (PUR) rigid foam based on polyether polyol and MDI isocyanate. The system has been developed so it can be dispensed through low and high pressure equipment or hand-mixed and poured. The foam was designed for use as a high density PUR moulded block foam with a core density of 160 kg/m3 for general purpose structural and applications
  • High Strength
  • Slow Reactivity
  • 1:1 w/w Mix Ratio
UrePac Rigid 90 37090370UrePac Rigid 90 370MSDS Urepac Rigid 90 370 PolyolUrePac® Rigid 90 370 is a high density, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. It was formulated to be a slow reacting, structural foam for hand mix or machine dispensed general purpose mouldings.
  • Exceptional Strength to Weight Rroperties
  • Long Reaction Times
  • Excellent Impact Resistance

PRODUCTS

Find out more!

Please contact us for more information on this product.

EXCELLENT

Insulation Values

EFFICIENT

Energy

HIGH STRENGTH TO

Weight Properties